FB1.ENDATDIAGSUPPORTED

Description

FB1.ENDATDIAGSUPPORTED returns the supported diagnostic messages.

The supported messages are bitwise decoded.

E.g. the first bit means that the first diagnostic message is supported, the second bit means that the second diagnostic message is supported etc.

Fieldbus Information

If your drive type is listed as supported but no index, address, or instance number is listed, then this parameter is accessible through WorkBench, but not over your fieldbus type. For information on SynqNet parameters see SynqNet Supported Parameters.

General Information

Type

R/O

Description Return information about supported diagnostic messages.

Units

N/A

Range

N/A

Default Value

N/A

Data Type

U16

Start Version

M_01-18-01-000

Variants Supported

Variant Supported
AKD Base Yes
AKD with Position Indexer Yes
AKD EtherCAT Yes
AKD CANopen Yes
AKD BASIC Yes
AKD SynqNet No
AKD EtherNet/IP Yes
AKD Profinet Yes
AKD sercos® III Yes
AKD-N Yes
AKD-C No