FB3.DIR

Description

FB3.DIR will change the sign and with it the direction of the position feedback (PL.FB ) when PL.FBSOURCE  = 2 (FB3).

General Information

Type

NV Parameter

Units

None

Range

0 to 1

Default Value

0

Data Type

U8

See Also

N/A

Start Version

M_01-11-03-000

Variants Supported

Variant Supported
AKD Base Yes
AKD with Position Indexer Yes
AKD EtherCAT Yes
AKD CANopen Yes
AKD BASIC Yes
AKD SynqNet Yes*
AKD EtherNet/IP Yes
AKD Profinet Yes
AKD sercos® III Yes
AKD-N No
AKD-C No

*In SynqNet, a parameter may be available in the firmware but have no effect on the system. See SynqNet Supported Parameters.

Fieldbus Information

If your drive type is listed as supported but no index, address, or instance number is listed, then this parameter is accessible through WorkBench, but not over your fieldbus type. For information on SynqNet parameters see Supported Parameters (➜ p. 1).

Fieldbus

Address

Attributes Signed?

Profinet

2944

Byte No
sercos® III 2 Octets
Fieldbus Instance Data Size Data Type
EtherNet/IP 945 1 Byte Integer