MLAddWriteRat2

 Function A function calculates a result according to the current value of its inputs. A function has no internal data and is not linked to declared instances. - Set the ratio value of the second entry of the Adder block.

Inputs

Input	Data Type	Range	Unit	Default	Description
BlockID	DINT	-2147483648 to 2147483647	N/A	No default	ID number of an initiated Adder object.
Ratio	LREAL	No range	N/A	No default	Designated new value for the Adder Object's Ratio2.

Outputs

Adder Block Output = Ratio1*Input1 + Offset1 + Ratio2*Input2 + Offset2

Output	Data Type	Range	Unit	Description
Default (.Q)	BOOL			Returns TRUE if the Ratio value for input two is set. See Pipe Network - General Rules.

Remarks

• 
  

• Changes made to the Ratio of an Adder block are executed immediately and can cause an axis position Position means a point in space which is described by different coordinates. Depending on the used system and transformation it can consist of a maximum of six dimensions (coordinates).This means three Cartesian coordinates in space and coordinates for the orientation. In ACS there can be even more than six coordinates. If the same position is described in different coordinate systems the values of the coordinates are different. to jump.

• Ratio2 amplifies the value of the second input to the block before its added to the first input.

Figure 1: MLAddWriteRat2\

FBD Language Example

FFLD Language Example

IL Language Example

Not available.

ST Language Example

//Change the ratio value of second entry to the Adder block to 2 
MLAddWriteRat2 ( PipeNetwork.MyAdder, 2 );

See Also

• MLAddReadOff2
• MLAddReadRatio2
• MLAddWriteOff2
• MLAddWriteRat1