PWM0.DUTYCYCLE
Description
PWM0.DUTYCYCLE configures the duty cycle of the PWM0 signal.
General Information
|
Type |
NV Parameter |
|
Units |
% |
|
Range |
0% to 100% |
|
Default Value |
0% |
|
Data Type |
Float |
|
See Also |
|
|
Start Version |
M_01-19-04-000 |
Variants Supported
| Variant | Supported |
|---|---|
| AKD Base | Yes |
| AKD with Position Indexer | Yes |
| AKD EtherCAT | Yes |
| AKD CANopen | Yes |
| AKD BASIC | Yes |
| AKD SynqNet | Yes* |
| AKD EtherNet/IP | Yes |
| AKD Profinet | Yes |
| AKD sercos® III | Yes |
| AKD-N | No |
| AKD-C | No |
*In SynqNet, a parameter may be available in the firmware but have no effect on the system. See SynqNet Supported Parameters.
Fieldbus Information
| Fieldbus | Index/Subindex | Object Start Version |
|---|---|---|
| EtherCAT COE and CANOpen | 34D8h/1 | M_01-19-06-000 |
| Fieldbus | Address | Attributes | Signed? | |
|---|---|---|---|---|
| PROFINET |
|
DWord | No | |
| sercos® III | 4 Octets |
| Fieldbus | Instance | Date Size | Data Type |
|---|---|---|---|
| EtherNet/IP | 1159 | 4 Byte | Float |
| Fieldbus | Address | 64 bit Parameter | Attributes |
|---|---|---|---|
| Modbus | 3132 | False | 32 bit |
