Settings
Display, Push-Buttons and Rotary Switches
Display (example for a dual-axis module)
Push buttons (B1, B2)
A short button press invokes the action corresponding to the symbol directly above the button. On the dashboard for example,
- a short press on B1 causes the menu system to appear, and
- a short press on B2 causes a help screen to appear.
- A long press (greater than 2 seconds) on B2 returns the display to the previous screen.
B1 / B2 Functions |
Description |
---|---|
Boot from SD card |
Push both buttons during power up to boot with data from the SD card. Press the buttons first, then hold it down while turning on the 24V power supply. |
Boot from flash |
Remove the SD card, then press both buttons and hold them down while turning on the 24V power supply to boot from an on-board recovery image. |
SafeID Validation |
Push B2 to acknowledge SafeID validation request on the display. |
Two decimal coded rotary switches are used to set a unique SafeID for the drive. S1 sets the tens place, S2 sets the ones place.
Process:
- Switch off 24V supply voltage.
- Set S1 and S2 to a unique SafeID.
- Switch on the 24V supply voltage.