General Specification

The 8-channel digital output terminals connect the binary control signals from the automation unit on to the actuatorsClosedA mechanical device for moving or controlling a mechanism or system. An actuator typically is a mechanical device which transforms an input signal (usually an electrical signal) into motion at the process level with electrical isolation and are protected against reverse polarity connection. They handle load currents with outputs that are protected against overload and short circuit. The Bus Terminals contain eight channels which indicate their signal state by means of light emitting diodes. They are particularly suitable for space-saving use in control cabinets. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point. The outputs are supplied by the 24 V power contact.

Electrical and Mechanical Specification

Electrical and Mechanical Specification
AKT-DT-008-000
Number of outputs
8
Rated load voltage
24 V DC (-15 % /+ 20 %)
Load type
ohmic, inductive, lamp load
Max. outp. current (p. channel)
0.5 A (short-circuit-proof), total current 3 A
Reverse voltage protection
yes
Electrical isolation
Current consumption power from contacts
typ. 60 mA
Current consumption Standard Bus
typ. 18 mA
Bit width in the process image
8 outputs
Configuration
no address or configuration settings
Weight approx.
70 g
Operating/storage temperature
0 C ... +55 °C /-25 °C... +85 °C
Relative humidity
95 %, no condensation
Vibration / shock resistance
conforms to EN 60068-2-6 / EN 60068-2-27/ 29
EMC resistance burst / ESD
conforms to EN 61000-6-2 (EN 50082) / EN 61000-6-4 (EN 50081)
Protect. class / installation pos.
IP 20 / variable
Pluggable wiring For all Bus Terminals