DS402.3ADDPOSFCSHAFTREV

Description

This object provides the number of driving shaft revolutions for the third additional feed constant calculation. This object shall be used with the corresponding subindex of the object 60E9h (feed for the third additional feed constant calculation). The value of the object 60E4h subindex 3 is calculated analog to the feed constant calculation for the actual position 6064h via object 6092h subindex 1 and 2.

General Information

Type	R/W Parameter
Units	N/A
Range	1 to 4294967295
Default Value	1
Data Type	Integer
Start Version	M_01-13-12-000

FieldbusA Fieldbus is an industrial network system for real-time distributed control (e.g. CAN or Profibus). It is a way of connecting instruments in a plant design	Index/Subindex	Object Start Version
EtherCATEtherCAT is an open, high-performance Ethernet-based fieldbus system. The development goal of EtherCAT was to apply Ethernet to automation applications which require short data update times (also called cycle times) with low communication jitter (for synchronization purposes) and low hardware costs COE and CANopen	Profile specific SDOs/3	M_01-13-12-000