AKT2G-EM-000-000

EtherCATClosed***EtherCAT is an open, high-performance Ethernet-based fieldbus system. The development goal of EtherCAT was to apply Ethernet to automation applications which require short data update times (also called cycle times) with low communication jitter (for synchronization purposes) and low hardware costs Bus End Cover for E-bus terminals, power, and E-bus contacts

Bus end cover for E-bus terminals, cover for power and E-bus contacts. This item has no electrical signals, it simply provides a barrier to the side bus connections.

Each EtherCAT terminal block must be terminated at the right hand end with a AKT2G-EM-000-000 bus end cap due to mechanical and electrical protection.

Technical Data

AKT2G-EM-000-000

Electrical isolation -
Bit width in the process image 0
Configuration no address or configuration settings
Diagnosis -
PE contact no
Renewed infeed -
Connection facility to additional power contact -
Side by side mounting on Bus Terminals with power contact yes
Side by side mounting on Bus Terminals without power contact yes
Electrical connection to mounting rail no
Weight approx. 8 g
Permissible ambient temperature -25°C ... +60°C (extended temperature range)
Permissible ambient temperature range (during storage) -40°C ... +85°C
Permissible relative humidity 95%, no condensation
Dimensions (W x H x D) approx. 8 mm x 100 mm x 34 mm (width aligned: 5 mm)
Mounting aligned to the last terminal in the terminal block
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC resistance burst/ESD conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Installation position variable
Approval CE, ATEX, cULus