FB1.INITPWINDOW

Description

This parameter defines the amount by which the position measured at power-up may differ from the position saved at power-down. If the difference is less than the window size, the position change at power off is considered small, and homing may be avoided. If the difference is greater than or equal to the window size, the position change during power off is large enough to require homing. Changes in the window size take effect after a non-volatile memory save and a power cycle. A window value of 0 disables the initial position check.

General Information

Type

R/W Parameter

Units

Depends on FB1.PUNIT counts or custom units.

Range

N/A

Default Value

N/A

Data Type

Integer

Start Version

M_01-10-00-000

Related Topics

Initial Position Check | FB1.INITPSAVED | FB1.INITPSTATUS