AKT-AT-410-000 / AKT-AT-810-000

General Specification

4/8-channel analog output terminals 0...10VDC.

The 4/8-channel analog output terminals generate signals in the range between 0 to 10 mA.
The voltage is supplied to the process level with a resolution of 12 bits and is electrically isolated.
In the 4-channel Bus Terminal the four outputs are 2-wire versions.
The 8-channel variants combine all eight channels in one housing and are particularly suitable for space-saving installation in control cabinets.
The use of single conductor connection technology enables the connection of multi-channel actuator A mechanical device for moving or controlling a mechanism or system. An actuator typically is a mechanical device which transforms an input signal (usually an electrical signal) into motion technology with minimum space requirements.
The Bus Terminals have a common ground potential.
The power contacts are connected through.
The reference ground of the outputs is the 0 V power contact.
The LEDs indicate the data exchange with the Bus Coupler.

Electrical and Mechanical Specification	AKT-AT-410-000	AKT-AT-810-000
Bit width in the process image	Output: 4 x 16 bit data (4 x 8 bit control / status optional)	Output: 8 x 16 bit data (8 x 8 bit control / status optional)
Configuration	No address or configuration setting
Conversion time	~ 4 ms	~ 8 ms
Current consumption from Standard Bus	20 mA
Electrical isolation	500 V_rms (Standard Bus/signal voltage)
EMC immunity/emission	Conforms to EN 61000-6-2 / EN 61000-6-4
Load	>5 Ω (short-circuit-proof)
Measuring error	< ±0.1 % (relative to full scale value)	< ±0.2 % (relative to full scale value)
Number of outputs	4	8
Operating / storage temperature	0 C ... +55 °C /-25 °C... +85 °C
Pluggable wiring	for all Bus Terminals
Protect. class / installation pos.	IP 20 / variable
Relative humidity	95 %, no condensation
Resolution	12 bits
Signal voltage	0…10 V
Vibration / shock resistance	Conforms to EN 60068-2-6 / EN 60068-2-27/ 29
Weight	75 g