Description
FB1.POFFSET is the value added to the primary feedback position (FB1.P).
Example
If FB1.P is 10000 counts and FB1.POFFSET is set to –10000 counts, then the next read of FB1.P will return ~0 counts.
General Information
|
Type |
NV-Parameter |
|
Units |
counts, custom units |
|
Range |
-5,123,372,000,000,005.000 to 5,123,372,000,000,005.000 counts |
|
Default Value |
0 |
|
Data Type |
S64 |
|
See Also |
N/A |
|
Start Version |
M_01-05-11-000 |
Variants Supported
| Variant | Supported |
|---|---|
| AKD Base | Yes |
| AKD with Position Indexer | Yes |
| AKD EtherCAT | Yes |
| AKD CANopen | Yes |
| AKD BASIC | Yes |
| AKD SynqNet | Yes* |
| AKD EtherNet/IP | Yes |
| AKD PROFINET | Yes |
| AKD Sercos® III | Yes |
| AKD-N | Yes |
| AKD-C | No |
*In SynqNet, a parameter may be available in the firmware but have no effect on the system. See SynqNet Supported Parameters.
Fieldbus Information
If your drive type is listed as supported but no index, address, or instance number is listed, then this parameter is accessible through WorkBench, but not over your fieldbus type.
| Index/Subindex | Object Start Version |
|---|---|
| 3490h/0 | M_01-00-00-000 |
| Fieldbus | Address | Attributes | Signed? |
|---|---|---|---|
|
PROFINET |
2809 | DWord | Yes |
| Sercos® III | 8 Octets |
| Instance | Data Size | Data Type |
|---|---|---|
| 810 | 8 Byte Signed | Position |
| Register Address | Is 64 bit? | Attributes | Signed? | Object Start Version |
|---|---|---|---|---|
|
1618 |
Yes | 64-bits | Yes | M_01-06-03-000 |
