60D8h, 68D8h Touch probe 2 negative edge counter - AxisX

A counter that is incremented with each falling edge of the touch probe 2 input.

The counter is only valid if the touch probe 2 is enabled (60B8h, bit 8 = 1b). When configured to capture only the first event only bit 0 changes. When configured for continuous triggering, the value is an unsigned 16-bit value with overflow.

See Touch Probes.

Axis 1

Parameter	Index	Sub-Index	Data Type	Float Scale	Units	Access	PDO Mappable	SMM Versions
Touch probe 2 negative edge counter - Axis 1	60D8h	0	Unsigned16	-	-	Read only	Yes	All

Axis 2

Parameter	Index	Sub-Index	Data Type	Float Scale	Units	Access	PDO Mappable	SMM Versions
Touch probe 2 negative edge counter - Axis 2	68D8h	0	Unsigned16	-	-	Read only	Yes	All