Description
This parameter sets the secondary feedback source to be either the EEO connector (X9) or the high speed opto inputs on the I/O Connector (X7) as follows:
0 = None
1 = Feedback Source X9 (EEO connector)
2 = Feedback Source X7 (High Speed Opto Inputs on the I/O Connector)
FB2 5V Power Supply Notes:
If FB2.SOURCE = 0 or 2 (X7), the 5V power supply will remain off.
If FB2.SOURCE = 1 (X9) the FB2 5V power supply will remain on unless a short is detected. This is useful for encoder types that may require calibration.
General Information
|
Type |
R/W Parameter |
|
Units |
N/A |
|
Range |
0 to 2 |
|
Default Value |
0 |
|
Data Type |
Integer |
|
See Also |
FB2.ENCRES, FB2.MODE, PL.FBSOURCE |
|
Start Version |
M_01-03-00-000 |
| Index/Subindex | Object Start Version |
|---|---|
|
51EEh/0 |
M_01-03-00-000 |
