Remote Input/Output Terminals

KAS Kollmorgen Automation Suite remote I/Os provide a complete spectrum of bus couplers, digital and analog inputs, digital and analog outputs, stepper, counter, and thermocouple modules.

Related Documents

This table is a list of each I/O component available.

I/O Terminal Part Number	I/O Terminal Description
AKT2G-AC-FAN-001	Fan cartridge for EtherCAT Ethernet ofr Control Automation Technology. EtherCAT® is an open, high-performance Ethernet-based fieldbus system. The development goal of EtherCAT is to apply Ethernet to automation applications which require short data update times (also called cycle times) with low communication jitter (for synchronization purposes) and low hardware costs. and Bus Terminals.
AKT2G-AN-240-000	2-channel input terminal PT100 (RTD) for resistance sensors A type of transducer that converts one type of energy into another for various purposes including measurement or information transfer.. 16-bit, 2-, 3-wire system.
AKT2G-AN-400-000	4-channel thermocouple input terminal. Preset to type K, with wire breakage detection. 16-bit
AKT2G-AN-430-000	4-channel analog input. Parameter capable -10/0 to 10V -20/0/+4 to +20mA 16-bit
AKT2G-AT-410-000	4-channel analog output terminal. 0 to 10V 1-wire system 12-bit
AKT2G-AT-425-000	4-channel analog output terminal. -10V to +10V 4 x 2-wire system 12-bit
AKT2G-BRC-000-000	Brake Chopper Terminal
AKT2G-DN-002-000	Up/down counter 24V_DC 100 kHz 32-bit counter depth
AKT2G-DN-008-000	8-channel digital input terminal 24V_DC. Filter 3.0ms 1-wire system
AKT2G-DNH-008-000	8-channel digital input terminal 24V_DC. Filter 10µs 1-wire system
AKT2G-DT-008-000	8-channel digital output terminal 24V_DC 0.5A 1-wire system
AKT2G-ECT-000-000	EtherCAT Coupler for E-bus terminals
AKT2G-EM-000-000	Bus end cover for E-bus terminals Cover for power and E-bus contacts, gray
AKT2G-ENC-180-000	1-channel incremental encoder interface Position signaling by 2 signals with 90° phase difference (i.e., quadrature) is no absolute position output. 32-bit
AKT2G-ENC-190-000	Incremental encoder The incremental encoder is simpler in design than the absolute encoder. It consists of two tracks and two sensors whose outputs are called channels A and B. As the shaft rotates, pulse trains occur on these channels at a frequency proportional to the shaft speed. The phase relationship between the signals yields the direction of rotation. AKA: Relative encoder. interface with differential input 16-bit / 32-bit
AKT2G-PSF-024-000	Power supply terminal with fuse 24V_DC
AKT2G-SDI-004-000	4-channel digital input terminal 24V_DC. Safety
AKT2G-SDO-004-000	4-channel digital input terminal 24V_DC. Safety 0.5A
AKT2G-SM-L15-000	Stepper motor An actuator focused to a movement, converting electrical energy in a force or torque. terminal 24V_DC 1.5A Vector control
AKT2G-SM-L50-000	Stepper motor terminal 50V_DC 5A Vector control

24-volt power is not passed through AKT-AN-200-000 and AKT-AN-400-000 thermocouple modules.
These are the solutions to get 24VDC power to devices that need it (e.g., an AKT_AT-410-000 Output module):
- Place the module requiring 24VDC before the thermocouple module.
- Add a power feed module (AKT-PS-024-000 or AKT-PSF-024-000) after the thermocouple module.

I/O Terminal Part Number	Description	Replaced By
AKT-AN-200-000	2-channel thermocouple input module	AKT2G-AN-240-000
AKT-AN-400-000	4-channel thermocouple input module	AKT2G-AN-400-000
AKT-AN-410-000	4-channel analog input module 0 to 10VDC	AKT2G-AN-430-000
AKT-AN-420-000	4-channel analog input module 0 to 20mA	AKT2G-AN-430-000
AKT-AN-810-000	8-channel analog input module 0 to 10VDC	AKT2G-AN-430-000
AKT-AN-820-000	8-channel analog input module 0 to 20mA	AKT2G-AN-430-000
AKT-AT-220-000	2-channel analog output module 0 to 20mA	N/A
AKT-AT-410-000	4-channel analog output module 0 to 10VDC	N/A
AKT-AT-420-000	4-channel analog output module 0 to 20mA	N/A
AKT-AT-810-000	8-channel analog output module 0 to 10VDC	AKT2G-AT-410-000
AKT-AT-820-000	8-channel analog output module 0 to 20mA	N/A
AKT-DN-004-000	4-channel digital input module 24V_DC 3.0ms	AKT2G-DN-008-000
AKT-DN-008-000	8-channel digital input module 24V_DC 3.0ms	AKT2G-DN-008-000
AKT-DNH-004-000	4-channel digital input module 24V_DC 0.2ms	AKT2G-DNH-008-000
AKT-DNH-008-000	8-channel digital input module 24V_DC 0.2ms	AKT2G-DNH-008-000
AKT-DT-004-000	4-channel digital output module 24V_DC 0.5A	AKT2G-DT-008-000
AKT-DT-008-000	8-channel digital output module 24V_DC 0.5A	AKT2G-DT-008-000
AKT-DT-2RT-000	2-channel Relay Output Module 230VAC 2.0A Rel.2NO Pot.-Free	N/A
AKT-ECT-000-000	EtherCAT Bus Coupler	AKT2G-ECT-000-000
AKT-EM-000-000	Standard-Bus End Terminal	AKT2G-EM-000-000
AKT-IM-000-000	Isolation / Separation Terminal	N/A
AKT-PS-024-000	Power Supply, 24V_DC	AKT2G-PSF-024-000
AKT-PSF-024-000	Fused Power Supply with diagnostics, 24V_DC	AKT2G-PSF-024-000
AKT-SM-L15-000	Stepper motor terminal 24V_DC 1.5A	AKT2G-SM-L15-000
AKT-SM-L50-000	Stepper motor terminal 50V_DC 5A	AKT2G-SM-L50-000

See our Web site for up-to-date information and material available in the Automation Component Solutions section.
You must log in before accessing KAS Literature.